M1007 MESH 670 GSM
High Gloss Surface
Products can achieve Gloss as per customer requirement up to 50-60 Gloss level @ 60deg
UV Resistant
PTFE SERIES products goes through accelerator weathering tester QUV and outdoor weathering test to ensure the product has high UV stability. it pass UV 801 with UPF80 Class
Very Flexible
FPC formulation, fabric and process are designed to provide optimal flexibility to products, ease of cutting, stitching, fabrication and welding depending on application and variants of products.
Minimal Warp to Weft elongation
FPC coating process is equipped with weft extension so as to provide linear and cross direction with minimal elongation variation
High Strength
FPC uses only high tenacity and low shrinkage polyester yarn to ensure high strength and dimensional stability to the coated fa fabric. The fabrics designed as per product and application requirement to withstand the tension requirements of the project
Specifications
| Typical Properties | Typical Characteristics | |
| Test & Method | English | Metric |
| Type of yarn | | EC6 Fiberglass | EC6 Fiberglass |
| Weave style | Plain | Plain |
| Linear Density | 3560 Den | 3960 Dtex |
| Total Weight EN ISO 2286-2 | 20 oz/yd2 | 670 g/m2 |
| Tensile strength DIN 53354 | 569/512 lbs/inch | 5000/4500 N/5cm |
| Open Area DIN 53357 | ~26% | |
| Translucency @ 550nm DIN 5036 | ~37% | |
| Fire Performance | DIN 4102 – A2 | |
FPC also works very closely with environmental protection companies which provide coherent and sustainable environmental sloutaions to industrial challenges, FPC Products Are REACH compliant, complaing th the most stringent EU regulations and directives
FPC takes stringent measures in environmental protection by taking extreme care in the selection of its raw materials,process and has a unique waste management system.
